With the continuous progress of science and technology, all walks of life have also achieved great development. The development prospects of wood grain paper are also very good, so the demand is increasing, and many manufacturers have been added to the market. As a manufacturer, it is necessary for us to tell you how to use wood grain paper here. Interested friends can take a look.
Wood grain paper is a decorative paper with imitation wood grain pattern on the surface. The base paper is generally kraft paper with embossed and dyed surface. It is used for the exterior decoration of furniture or other products and is a common home decoration material. It has a wide range of uses and can be applied to a variety of products. Wood grain paper has beautiful patterns, high ornamental value and strong practicality; especially its patterns are embossed and printed, which is simulated; the price is generally low, cost-effective, and widely favored by consumers. How to use What you need to know is that before sticking wood grain paper, you must first clean the surface of the wood grain paper and the furniture or items to be pasted, and smooth the burrs and oil stains on the surface with sand. If there are holes, they need to be filled; of course, it is also recommended to construct in an environment with a temperature of 15-20 degrees high and 5 degrees low; if you can choose wood grain paper with glue-free veneer, you need to prepare white latex or glue and apply the glue evenly on the surface. Wait for a while after gluing, depending on the environment, until the glue is a little sticky, not too dry.
In addition, when pasting wood grain paper, you need to know that you should roll the wood grain paper evenly with a roller, gently put it on one end of the self-adhesive sticker, and squeeze it to one side after it is firmly glued. Stick the other end, pay attention to smoothing it, and don't let bubbles enter; if bubbles accidentally enter during the pasting process, you can pierce it with the tip of the knife, and then use a scraper to push the air out. It is recommended that you can wrap the scraper with a soft wet cloth to avoid damaging the surface; it is recommended to scrape off the glue squeezed out of the surface with a knife after pasting, wait for the glue to dry, or use a hair dryer to heat the wood grain paper, wear gloves or press your fingers gently with a soft cloth to get good results. Now when decorating with wood grain paper, the size of the surface of the decorated object is different, and the amount of wood grain paper used is also different. For example, this can be done when decorating a room with wood grain paper. For example, if the width of a bedroom is 5m and the length is 3m, then the perimeter is 16m=(53)*2; the total height of the wallpaper wall = the length of the room - the width of the door - the width of the window, that is, 13.3m=16m-1.8m-0.9m. Under normal circumstances, the height of the wall is generally between 2.3m-2.9m.